POC-100 User’s Manual
Copyright © 2013 Neousys Technology Inc. All Right Reserved.
Page 40 of 65
3.4 Mount your POC-100
POC-100 provides versatile ways of mounting. The chassis itself is designed to be used as
a mounting bracket, which can mounted inside-out or outside-in. Neousys also offers the
option of DIN-rail mounting clip so you can mount POC-100 on a DIN rail. To mount your
POC-100, please refer to the information listed below.
Mount your POC-100 Inside-out on a Surface
To mount you POC-100 inside-out on a surface, you need to remove its chassis from the
heat sink. Please follow the steps listed in Section 3.1, Step 1~3. And then you can use the
chassis as the mounting bracket as following.
Once you fix the chassis inside-out on a surface, you can slide the assembly of PCBA +
heat sink back into the chassis. Fix it with bolts/screws and the POC-100 is firmly mounted
on a surface.