Neousys Technology Nuvo-7000 Series страница 5 Скачать руководство пользователя

Страница: 5 / 166

Legal Information

Legal Information

All Neousys Technology Inc. products shall be subject to the latest Standard

Warranty Policy

Neousys Technology Inc. may modify, update or upgrade the software, firmware or

any accompanying user documentation without any prior notice. Neousys

Technology Inc. will provide access to these new software, firmware or

documentation releases from download sections of our website or through our

service partners.

Before installing any software, applications or components provided by a third party,

customer should ensure that they are compatible and interoperable with Neousys

Technology Inc. product by checking in advance with Neousys Technology Inc..

Customer is solely responsible for ensuring the compatibility and interoperability of

the third party’s products. Customer is further solely responsible for ensuring its

systems, software, and data are adequately backed up as a precaution against

possible failures, alternation, or loss.

For questions in regards to hardware/ software compatibility, customers should

contact Neousys Technology Inc. sales representative or technical support.

To the extent permitted by applicable laws, Neousys Technology Inc. shall NOT be

responsible for any interoperability or compatibility issues that may arise when (1)

products, software, or options not certified and supported; (2) configurations not

certified and supported are used; (3) parts intended for one system is installed in

another system of different make or model.

Содержание Nuvo-7000 Series







































































































































































Результаты поиска

Содержание Nuvo-7000 Series

Отзывы:

Похожие инструкции для Nuvo-7000 Series

Бренды по названию

Популярные бренды

Neousys Technology Nuvo-7000 Series, Руководство пользователя

Результаты поиска

Содержание Nuvo-7000 Series

Отзывы:

Похожие инструкции для Nuvo-7000 Series

Бренды по названию

Популярные бренды