Neopost RENA XPS-ProMail 3.0, Руководство пользователя

Страница: 58 / 76

SECTION 5
TROUBLE SHOOTING
58
USER GUIDE
MESSAGE DESCRIPTION SOLUTION
PAUSE: Waiting for Data
Printer is waiting for data from
the computer, or needs more
time to receive/process data.
NOTE : The printer’s keyboard
will be unresponsive at this
time.
When more data is sent from
computer, or printer finishes
receiving/processing data then it
will automatically continue.
PAUSE: Off-Line Pause
Printer received an “Off-Line”
PAUSE (tray break) command
from the software.
Press ONLINE key to continue.
PAUSE: Timed Pause-Wait
Printer was sent a Timed Pause
(tray break) command via
software.
Printer will automatically continue
when time expires.
Transport Time-Out
The printer has timed out and
has stopped the transport.
No data, no paper, no operator
response, etc… for >5 minutes.
Press appropriate key to
continue.
Head # Low: Press Enter
Printer’s ink level monitor has
calculated that cartridge # is
almost empty.
(# = cartridge position number)
If empty, replace cartridge and
reset ink level monitor.
If not empty, you may ignore
message and or reset the ink
level monitor.
Out of Memory Font
No enough memory for
downloading a font
Reduce the number of different
fonts you are trying to use from
your software.
Out of Memory Char
No enough memory for
downloading a single character
Reduce the number of characters
you are trying to use from your
software.
Error in Download Font
Encountered a wrong font
Format
Only font-format 0 supported.
Clear job and try again. If problem
persists, contact software vendor
and or test from a different
software program.
Error in Download Char
Encountered a wrong character
Format or Class.
Only character format 4
(LaserJet Family - Raster),
Class one and two are
supported.
Clear job and try again. If problem
persists, contact software vendor
and or test from a different
software program.
Error in ESC Sequence
The Escape command is
formatted incorrectly.
Try again. If problem persists,
report problem to software
vendor.
Ignore Unknown ESC Comnd
The Escape command sent is
not supported.
Try again. If problem persists,
report problem to software
vendor.