Neopost RENA XPS-ProMail 3.0, Руководство пользователя

Страница: 39 / 76

SECTION 3
OPERATING THE SYSTEM
39
USER GUIDE
Automatic Feed –Turning the feature ON will cause the printer to automatically start
feeding and printing, without the need to press ENTER, if the printer is placed on-line
before it starts receiving data.
Enter when head (n) filled – The printer is capable of calculating when it thinks an ink
cartridge is running low of ink. To use this feature press the MENU key momentarily. Then
use the “
+ ” or “ - ” key to highlight “Enter when head ( n ) is filled”. Press the ENTER key and
install a new cartridge. Repeat for each cartridge you install. When the ENTER key is
pressed the display will change to “Head (
n ) has a new cartridge”. To check the level of ink
in the cartridges, Press and hold the TEST key until the “Service Menu” appears. Use the
“+” or “-” key to scroll to the “Service Menu: Ink Levels, 100%100%100%”. This will show
how much ink remains in the cartridge.
NOTE: The “Ink Level” feature is only accurate if the cartridges remain in the original
positions where they were first installed. If you swap the cartridges from one pen stall
position to another, the levels will not be accurate.
Setup Menu: To access the Setup Menu; press and hold the MENU key until the “Setup
Menu” appears. Step through the Setup Menu items, using the “ + ” or “ - ” key.
Total Count – The total count displayed is the total number of prints that have passed
through the printer. It is non-resettable.
BIOS Version – Displays the version of the BIOS installed in the printer. From time to
time it may be necessary for a technician to upgrade the BIOS in the printer. When this
is done, the new BIOS version can be checked in this manner.
Head # uses a cartridge or Head # is using bulk ink
This feature changes the amount of ink that the “Ink Monitor” bases its calculation on.
cartridge = standard 45A style cartridge (~42 ml of ink)
bulk ink = bulk ink cartridge/bladder (~420 ml of ink) This feature is provided in case a
bulk-ink bladder is used. Currently no provisions are made to hold a bulk ink bladder.
+ / - (plus / minus) keys
In the various menu modes these keys are used to step through the options.
ON LINE key
Pressing the ON LINE key will cause the printer to change from the on-line state, to the off-
line state, or vice-versa.
The LED on this key will slowly flash when there is power present and the printer is off-line.
The LED on this key will turn on (steady), when the printer is placed on-line.
Pressing the ON LINE key during the printing operation will take the printer off line and
immediately stop the printing process (may not print complete image).
Tip: It is best to use the ENTER key to stop the printing process. Doing so will stop the
feeder and allow all pieces in the paper path to finish feeding and printing.
RESET key
The RESET key is used to clear the printer memory and return it to its initial state (wait
state). Press and hold until the display goes blank, then release the key. This key only
functions if the printer is off line.