Neopost IM-75, Руководство пользователя

Страница: 17 / 24

16
6. MAINTENANCE
Warnings
• Disconnect the mains supply before
performing any maintenance.
The user must not attempt to
service the appliance beyond that
described in this operator
manual. All other servicing must
be carried out by qualified service
personnel only. Please contact
your authorized distributor.
6.1 General cleaning
The machine must be kept in proper
condition by regularly removing dust,
paper remains, etc. (e.g. daily).
6.2 Replace filters
The vacuum system for the suction arms
each have an air filter system to remove
dust particles. This is designed to prevent
the system from becoming blocked with
paper dust and dust from the
environment. It is still possible that the
vacuum system is degraded as the filter
becomes clogged with dust.
It may therefore be necessary to
periodically clean out or replace the
filters. If for example the suction air
regulation is at maximum and the vacuum
is still not enough, replace the filters.
The filters are located at the envelope
feeder.
A : Filter envelope feeder
B : Filter top suction arm
C : Filter bottom suction arm
• Turn the knobs counter clockwise to
gain access to the filters.
• Replace the filters.
• Turn the knobs to fix the filters in the
system.
7. OPTIONS
Please contact your service organization
for more information for any of the below
mentioned options.
7.1 Tables / arm rest
For the system three different arm rests
are available: a metal rest, a metal rest
with small compartments and a leather
rest.
7.2 Sorting trays
For the system sorting trays of metal up
to three levels are available.
The max. height of the sorting
tray's when mounted on the
system is 330 mm (measured as
from the top plate of the system).
7.3 Side table
To install extra sorting trays a side table
can be mounted on the right of the
system.
The max. height of the sorting
tray's when mounted on the side
table is 470 mm (measured as
from the top of the side table).
This side table cannot be combined with
the transfer station (see “Transfer station
(TS-1)” on page 17).
7.4 Electronic stapler
For the system an electric stapler is
available and can be used for stapling
documents up to 4 mm.
+
-
+
-
A
B
C