Neopost IM-75, Руководство пользователя

Страница: 11 / 24

10
4. OPERATING THE MACHINE
4.1 Switching on
The system can be switched “on” or “off”
with the power switch (refer to the section
Operating controls, General). After
switching on, the switch lights up and the
display shows the counter total of the
Opto-electronic mode or Automatic mode.
4.2 Adjustments for envelope
feeding
Adjust the envelope feed hopper as
follows:
• move feed block B (see figure below) as
far back as possible. Knock up the stack
of envelopes against a flat surface to
ensure the contents fall to the bottom
and the left hand edge.
• Try to pick out or straighten any
severely ragged, misshapen or poor
quality envelopes.
• place the envelope with the knocked
edge downwards against the feed block
and ensure that they are touching the
left hand side guide A. It makes no
difference which way round the
envelopes are placed.
• adjust the left and right hand side
guides A and C to ensure that the
envelopes are centrally positioned in
relation to the suction arm E.
• push the feed block B with the stack of
envelopes forward until the first
envelope is touching the red retainers D
and F.
• adjust the separators G (3 in total) in
such a way that they overlap the
envelopes by approximately 5 mm (see
figures below).
You can use the extendable supports to
position a crate containing envelopes.
You can position a stock of envelopes on
rubber profile H.
Make sure that there is a 5 mm gap
between B and the right hand side guide,
in order to stop the hopper once all
envelopes are processed.
A
B
H
G
F
E
D
C