Neopost IM-75, Руководство пользователя

Страница: 15 / 24

14
4.12.2 Control lamp
If the machine suddenly ceases to operate
and the same time the control lamp J
lights up, this indicates that there is still
something inside the last envelope, which
is currently lying in the waiting station.
Remove the contents from the envelope
manually and press button E (operating
controls, control panel) to activate the
ejection flap.
Press cancel button N. The machine now
resumes operation!
4.13 Conveyor (optional)
The system can be equipped with one or
more conveyors of different lengths to
transport documents. To use conveyors
the optional transfer station is needed.
Via an optional stop cable the first
conveyor can be connected to the system.
For more information refer to the chapter
Options.
Maximum amount of connected
conveyors (115V or 230V): 4x
115V - load each LC-2/LC-3:
0.7A.
230V - load each LC-2/LC-3:
0.4A.
CAUTION: At installation ensure
the stability of the conveyor
belt(s). This has to be done by
using the delivered fixing plates
and by installing it (them)
between two tables or other
stable furniture!
4.13.1 Setting up the conveyors
• Switch the main switch A on (refer to
operating controls, conveyor) of all
conveyors.
• Regulate the belt speed with speed
control knob B. All conveyors are
controlled by the first conveyor belt.
• When more than one conveyor belt is
used, switch button for sensor stop E on
at the last conveyor to have the last
conveyor photocell stop all the belts.
• To stop all conveyors switch off the
mains switch A at the first conveyor.
4.13.2 Working process
The conveyors will rotate as long as all
sensors are not covered. When the sensor
at the first conveyor is free, only the first
conveyor rotates until the sensor is
covered again.
When the sensor at the second conveyor
is free the first and second conveyors run
until both sensors are covered again.
When the sensor at the third conveyor is
free all three conveyors run until all
sensors are covered again.