NeoDen YY1, Руководство пользователя

Страница: 25 / 37

25
4.2 Install the Tape Reel
The way to fix tape&reels into
the magazine.
1
2
For small PCB, fix a base board first,
paste the blocking strip on the base
board to fix the PCB.
For particularly large PCB, remove the origin
screw, on feeder block have set positioning support,
for even larger PCB, if left feeder quantity is
enough, remove the right side feeder.
First use method 1 to fix base board
same as PCB which will be mounted,
solder 2-3 pins on the holes of base
board, use these pins to fix PCB.
If the PCB origin is not in the default position,
you need to set the PCB origin in the system
parameters. Setting method: in the manual
setting page, move the camera to the new
PCB origin, record the coordinates, and fill
the coordinates into the PCB origin.
The way to load tape&reels into
feeders