NeoDen YY1, Руководство пользователя

Страница: 7 / 37

7
2. How to Quickly Place Your First Board
Quick operation flow chart
1. You have two ways to generate placement files, export csv files through EDA
design software or manually create new ones.
2. Before exporting the csv file, you need to set the lower left corner as the origin
point (the Bottom layer is the lower right corner), as shown in Figure A.
3. After the EDA software exports the form file, please open it on the computer to
confirm the components information, you can delete some useless information such as
plug-in components, but the format cannot be changed.
4. Copy the csv file to the SD card and insert it into the machine to do following
operation. If the format is correct, the machine will read and convert the csv file
information.
5. On the machine, the necessary steps are: Load components > Feeder settings >
Component editing > Placement.
6. Fiducials and panelized boards are optional, can be set according to the page
instructions if necessary.
7. When place the first board, use the "step" function to try to place a few
components firstly, and after confirming the settings and placement files are both
correct, then can be automatically placed. You can also stick double-sides adhesive
tape to verify the first board (if the fiducials are set, the double-sides adhesive tape
cannot cover the fiducials).