NeoDen YY1, Руководство пользователя

Страница: 10 / 37

10
3.2 File Edit Page
As previously referred, the CSV coordinate file can be directly imported into
machine through SD card for programming. What we must take notice is the correct
CSV file will be automatically converted to the related format while loaded but if
there’s error warning, it should be the file format wrong or the file was generated by
some unsupported EDA. Click correct file, you can continue programming or
placement process.
3.2.1 Edit Component
When you click “Edit Component”, it will turn to below interface. There’re some
tips for ref. during your programming:
1. All information in this area is related to feeder, generally for same kind of footprint
setting, you can directly click “Apply all same components”, then the six parameters
in this area will be workable for all of the same footprint.
2. You can modify parameters of the components one by one, and you can also
modify the parameters by using “Apply all same components” to realize modify the
same kind footprint components quickly.
3. If the component specifications are the same and the component footprint is also
same, they will be classified as the same type of components.
4. There are five recognition modes
：
0 (Null), 1 (Camera), 2 (Vacuum), 3 (
Vacuum), 4 (Big IC Camera). You can select the applicable mode for different
components to realize a balance between speed and accuracy. When you select 4,
the field of view area will be enlarged. Please make sure there’s no direct- light above
the machine otherwise it will affect the recognition, you can cover something on the
machine to escape the direct light.