NeoDen YY1, Руководство пользователя

Страница: 35 / 37

35
5. Machine Adjustment Guide and Maintenance
5.1 How to Adjust the Peeling Torque
5.2 How to Adjust the Shrapnel of Tape Reel Feeder
1. Sheet metal is used to press the tape to make sure tape without any movement.
2. Tape feeder damping piece is used to increase friction and reduce vibration.
3. If component is very thick, you can try to lower the sheet metal pressure like this:
loosen the screw a little bit or take off the sheet metal and use some tool to change its
1
2
After removing these
two screws, the damping
wheel can be easily
removed or installed in
sequence.
A damping ring with 2.5N torque is
placed in the damping wheel. If you
want to reduce the torque, you can
replace it with the damping ring with
1.5N torque. If you want to increase the
torque, you can also put two damping
rings. It needs to be adjusted only for
very special tapes.