
10
♦Fan management
Click the Fan Control button in the lower right corner to enter the management page.
Drag the adjustment button to adjust the required wind speed. The default value is 100.
HOT1-HOT6 is the hot wind speed of 1-6 temperature zone, COOL is the wind speed
of cooling zone.
♦File generation Wizard
(Note: due to the great difference in complexity of each product, the temperature
parameters generated are only used as reference. In order to achieve the best solder
effect, it is necessary to measure the temperature curve and improve the parameters
after comparing with the temperature curve provided by the solder paste manufacturer.)
Step 1: select the type of solder paste to solder the product. If the model is not found in
the list, please go to search in the appendix, or ask the solder paste manufacturer about
the melting point, and then select the option with the closest melting point.