Disconnect compressed air supply from the stapler.
Remove deposition of sticky substance with kerosene, diesel oil or other solvent. Do not allow used fluid to get inside the stapler, it may
damage the tool. Dry the stapler carefully before next use.
Technical specification of stapler
Pneumatic 14-570 stapler
Parameter
Value
The maximum you
ś
working pressure
8.3 bar
Permissible
ś
working pressure
4.8 ÷ 8.3 bar
Compressed air hose connection type
1/4 "
Type of staples
Ga18
The length of the staples
16 ÷ 40 mm
The thickness of the staples
1.25 x 1.00 mm
Type of nails
300
The length of the nails
15 ÷ 50 mm
The thickness of the nails
1.25 x 1.00 mm
Dimensions
250 x 255 x 55 mm
Mass
1.5 kg
Year of production
2020
14-570 designates both the type and designation of the machine
NOISE AND VIBRATION DATA
Sound pressure level
L
p A
= 92.1 dB (A) K = 2.5 dB (A)
Sound power level
L
WA
= 105.1 dB (A) K = 2.5 dB (A)
The value of accelerations
a
h
= 2.5 m / s
2
K = 0.2 m / s
2
Information on noise and vibration
The L
WA
and L
pA
values are tool-specific values and do not reflect noise generation at the point of use. The noise at the point of use will,
for example, be dependent on the working environment, workpiece, workpiece support, and number of driving operations.
NOTE The design of the workplace can also be used to reduce the noise level, such as placing workpieces on soundproof supports
NOTICE The equipment emits residual vibrations that have not been eliminated by design and construction, remaining as a residual
vibration risk. This enables employers to identify the circumstances under which the operator may be exposed to vibration.
NOTE The above vibration emission value a
h
is a tool-related characteristic value and does not represent an effect on the hand-arm
system when using the tool. Any effect on the hand-arm system when using the tool will depend on, for example, the gripping force, contact
pressure force, direction of operation, energy control, workpiece, workpiece support.
The level of noise emitted by the device is described by: the level of the emitted sound pressure Lp
A
and the sound power level Lw
A
(where
K stands for measurement failure). The vibrations emitted by the device are described by the value of the vibration acceleration a
h
(where
K is the measurement uncertainty).
The following information: emitted sound pressure level Lp
A
, sound power level Lw
A
and vibration acceleration a
h
were measured in
accordance with EN 12549. The specified vibration level a
h
can be used for the comparison of devices and for a preliminary assessment
of exposure to vibrations.
The stated vibration level is representative only for the basic use of the device. If the machine is used for different applications or with
different work tools, the vibration level may change. The higher the vibration level will be influenced by insufficient or too rare maintenance
of the device. The reasons given above may result in an increased exposure to vibration throughout the service life.
To accurately estimate exposure to vibration, consider periods when the equipment is turned off or when it is turned on but not
in use. After all factors have been carefully assessed, the overall vibration exposure may be significantly lower.
In order to protect the user against the effects of vibrations, additional safety measures should be implemented, such as: periodic
maintenance of the device and working tools, protection of the appropriate temperature of hands and proper organization of work.
Environment protection
When disposing of the tool return it for recycling. Segregate parts of the tool, accessories and the package.
Metal products should not be disposed of with household wastes, but should be utilised in proper recycling
centres. Obtain information on waste recycling from your seller or local authorities. Used equipment contains
substances active in the natural environment. Unrecycled equipment constitutes a potential risk for the
environment and human health.
RU
ПЕРЕВОД ОРИГИНАЛЬНОГО
(
ПО
ЭКСПЛУАТАЦИИ)
РУКОВОДСТВА
ПНЕВМАТИЧЕСКИЙ СТЕПЛЕР
14-570
Содержание 14-570
Страница 1: ......