−
Be careful with tools without contact with the workpiece as they may be accidentally shot and injure the operator and / or
bystander.
−
Make sure that the tool is always securely hooked on the workpiece and cannot slip
Hazards during use
The following rules apply:
−
Hold the tool correctly: be prepared to counteract normal or sudden movements such as kickback.
−
Maintain a balanced body position and a stable footing.
−
Use properly selected protective glasses and work gloves. The use of protective clothing is recommended.
−
Wear the correct hearing protection.
−
Use the correct energy source as instructed.
Dangers of repetitive movements
The operator may experience discomfort in the hands, arms, shoulders, neck or other parts of the body when using the tool for an extended
period of time .
The following rules apply:
−
Operator adopts a suitable, ergonomic posture when using the implement. Stay safe while standing on your feet and avoiding
uncomfortable or unbalanced positions.
−
If the operator experiences symptoms such as persistent or repeated discomfort, pain, throbbing, tingling, numbness, burning, or
stiffness, do not ignore these warning signs. The operator consults with a qualified healthcare professional on general
operations.
−
Any risk assessment should focus on musculoskeletal disorders and is based preferentially on the assumption that reducing work
fatigue is effective in reducing disorders.
Threats to accessories and consumables
The following rules apply:
−
Disconnect the power supply to the tool, such as air or gas, or the battery before replacing / replacing accessories such as contact
with the workpiece or making any adjustments.
−
Use only the sizes and types of accessories recommended by the manufacturer.
−
Use only lubricants recommended by the tool manufacturer.
Workplace Hazards
The following rules apply:
−
Slips, trips and falls are the main causes of accidents in the workplace. Watch out for slippery and dirty surfaces and the risk of
tripping from the compressed air supply hose.
−
Use extreme caution in unfamiliar surroundings. There may be hidden dangers such as electricity or other power lines.
−
This tool is not intended for use in a potentially explosive atmosphere and is not electrically insulated.
−
Make sure there are no electric wires, gas pipes, etc., which could become a hazard if damaged by the use of the tool.
Dust and fumes hazards
If the tool is used in an area with static dust, the dust may be ejected again and pose a hazard.
The following rules apply:
−
The risk assessment should include the dust generated by the use of the tool and the elevation of static dust previously present
in the workplace.
−
Direct the outgoing air stream to minimize dust lifting in the environment.
−
In the event of a dust hazard, use properly selected dust masks.
−
If there is a risk of exhaust fumes, the level of their emissions should be controlled not to allow the oxygen content in the air to fall
below 17% and appropriate personal protective equipment, such as dust masks or helmets with an external source of clean
air, should be used.
Noise hazards
The following rules apply:
Содержание 14-570
Страница 1: ......
