Warning
PROTECT EYES AND EARS USE ANTI-SPLINTER GOGGLES OR GLASSES AND EARMUFF PROTECTORS. PROVIDING
INFORMATION TO PERSONS NEARBY ABOUT NECESSARY PRECAUTION MEASURES MENTIONED ABOVE IS THE
RESPONSIBILITY OF THE EMPLOYER OR THE USER.
Caution!
CHECK YOUR STAPLER AND REPLACE DAMAGED PARTS BEFORE USING THE TOOL WHENEVER NECESSARY. ALL LABELS
WITH WARNINGS MUST ALSO BE REPLACED IN CASE THE ORIGINAL ONES ARE NOT READABLE.
Fig. 1
Put few drops of lubricating oil into air inlet.
Fig. 2
Connect quick coupler to the stapler.
Empty the stapler clip.
Fig. 3
Connect the stapler to air compressor with flexible hose with inside diameter 3/8”. Ensure the hose
is marked, that working pressure must not exceed 100 psi (0.7 MPa) and it ends with female quick
coupler connector.
Fig. 4
Adjust air supply pressure so the stapler receives pressure from its working range
60
–
100 psi (0.4
–
0.7 MPa).
Disconnect air supply from the stapler.
Fig. 5
Load staples into the stapler, follow instructions given in this manual in p. 3.
Ensure staples are driven correctly, try it on exemplary piece of wood.
When staples are not driven to desired depth, increase pressure to
achieve necessary penetration. However, do not exceed pressure
100 psi (0.7 MPa)!
Содержание 14-570
Страница 1: ......
