STEP 1:
Inspect shipping package and contents to
ensure no damage has occurred during
shipping.
STEP 2:
Assemble Yoke mount with carriage bolts on
inside and with washers and nuts.
Note:
By alternating the rotation mounting hole you
can determine either an upward swing or
downward swing.
STEP 3:
Install Yoke Mount with included M6 bolts
and washers to MR Head.
Torque to 7 N-m (62 in-lbs)
STEP 4:
Mount fixture assembly to desired location
2-
4x 1/4-20 OR M6 Screws or Bolts.
STEP 5:
Adjust and Aim fixture to desired position. Torque
hardware nuts to 9 N-m (80 in-lbs).
STEP 6:
Resume installation instructions provided
with fixture. (STEP 4)
43mm
4 x 7mm
72mm
2.83in
51mm
60 deg
MR-YM – YOKE MOUNT INSTALLATION (Ordered Separately)
Refer to alternate instructions if using Pole, Wall, Conduit or Hook Mount
This MR-YM kit is intended for use with UL Listed MR luminaire as
marked on the luminaire nameplate.
Accessory Package Contents
INSTALLATION STEPS
MR-YM
PART NAME
QTY
1
1
4
4
4
YOKE MOUNT A
YOKE MOUNT B
1/4-20 HEX NUT
1/4" FLAT WASHER
1/4-20 x 0.5in CARRIAGE BOLT
90° Upward
swing
90° Downward
swing
TM
Nemalux
I N D U S T R I A L
MR-GEN
rev. A-15
1-1
www.nemalux.com | [email protected] | Tel 403•242•7475 | Fax 403•243•6190
MADE IN CANADA
