STEP 1:
Inspect shipping package and contents to
ensure no damage has occurred during
shipping.
STEP 2:
Install the provided plastic 3/4” bushing.
STEP 3:
Install Pole Mount and gasket with adhesive
side applied to mount and included M6 bolts
and washers.
Torque to 7 N-m (62 in-lbs)
STEP 4:
Thread fixture assembly onto 1.5” NPT pole.
STEP 5:
Insert and tension M6 set screw to pole to lock
rotation.
Torque to 5 N-m or 44 in-lbs.
STEP 6:
Resume installation instructions provided
with fixture. (STEP 4)
Set Screw
TM
Nemalux
I N D U S T R I A L
MR-GEN
rev. A-15
1-1
www.nemalux.com | [email protected] | Tel 403•242•7475 | Fax 403•243•6190
MADE IN CANADA
MR-PM – POLE MOUNT INSTALLATION (Ordered Separately)
Refer to alternate instructions if using Wall, Yoke, Conduit or Hook Mount
INSTALLATION STEPS
This MR-PM kit is intended for use with UL Listed MR luminaire as
marked on the luminaire nameplate.
Accessory Package Contents
MR-PM
PART NAME
QTY
1
1
4
4
1
1
POLE MOUNT
POLE MOUNT GASKET
M6 X 25mm HEX HEAD CAP SCREW
M6 FLAT WASHER
M6 X 16mm HEX HEAD CAP SCREW
3/4 NPT THREADED SMOOTH BORE BUSHING
