STEP 1:
Inspect shipping package and contents to ensure no
damage has occurred during shipping.
STEP 2:
Install provided 3/4 NPT conduit plugs in desired
locations.
To maintain ingress rating all NPT entries
not used for wiring connections are required to be
plugged. Torque to 10 Nm (88 in-lbs)
NOTE:
To aid in assembly and protection against ingress use
of a petrolatum or soap thickened mineral oil based
thread lubricant/sealant is necessary.
STEP 3:
Install provided 3/4” NPT plastic bushing.
STEP 4:
Install Wall Mount main body with included M6 bolts
and washers and adhesive backed gasket. Apply
gasket to mount with adhisive backed side. Torque to
7 N-m (62 in-lbs)
STEP 5:
Install Back Cover Plate with 4x M4 Flat head screws
and adhesive backed gasket. Apply gasket with
adhesive side applied to mount main body.
Torque to 2 N-m (17 in-lbs)
MR-WM – WALL MOUNT INSTALLATION (Ordered Separately)
Refer to alternate instructions if using Pole, Yoke, Conduit or Hook Mount
This MR-WM kit is intended for use with UL Listed MR luminaire as
marked on the luminaire nameplate.
Accessory Package Contents
MR-WM
PART NAME
QTY
1
1
1
1
4
4
4
3
1
WALL MOUNT
WALL MOUNT PLATE
WALL MOUNT PLATE SIDE GASKET
WALL MOUNT GASKET
6 x 25mm SOCKET HEAD CAP SCREW
M4x 10mm FLAT HEAD SOCKET CAP SCREW
M6 FLAT WASHER
3/4 NPT HEX CAP PLUG
3/4 NPT THREADED SMOOTH BORE BUSHING
INSTALLATION STEPS
TM
Nemalux
I N D U S T R I A L
MR-GEN
rev. A-15
1-2
www.nemalux.com | [email protected] | Tel 403•242•7475 | Fax 403•243•6190
MADE IN CANADA