NEJE E80, Руководство пользователя

Страница: 4 / 17

curtailed, which is the reason why NEJE has not launched new products. The NEJE E80
adopts a more extreme solution, and NEJE adopts a more advanced external FAC, first
combine the two beams, and then combine them again through the lens system. This
way the angle of light is smaller, and the focus is smaller. Two lens technologies are
applied here, and the manufacturing process is much more complicated. However, the
effect is very different. In fact, the manufacturing cost of E80 will be higher than other
20W lasers (optical power), but NEJE is the manufacturer, and other merchants are third-
party modules purchased by marketing companies, which is also the advantage of NEJE
as a full-stack design and manufacturer, and why NEJE can provide after-sales service as
standard. I really want to tell users, don't just look at the parameter of power, do users
only need the laser to burn?
Q: If I connect the E80 with the 24v power supply in my NEJE 3 max, can you confirm the
NEJE air valve AF3 and the relay will continue to work fine?
I see 3 options:
1. Power on M7 and M8 NEJE modules connectors are still 12v even if the main NEJE 3
MAX board is powered at 24v
2. NEJE AF3 and relay modules can work in 12v or 24v.
3. NEJE AF3 and relay modules cannot work in 24v.
The relay can normally use 24V power supply. If you need to use the air valve, it is
recommended to replace the 24V power supply. The gas valve can also be powered by
12V for short periods of time. Over time, increased temperatures may affect the life of the
air valve.