NEJE E80, Руководство пользователя

Страница: 7 / 17

1. Reset the motorized Z-axis in the direction of Z0;
2. Find the focus position of the module, and record the distance between the focus and the
module;
3. Install the module on the motorized Z-axis, and set the focus position The distance to the
honeycomb board is set as the electric Z-axis travel distance, (the distance from the module
to the honeycomb platform = the distance from the focus to the the distance from
the focus to the honeycomb platform), the LightBurn software sinking setting parameters =
Z-axis travel - material thickness, the first One knife focus is set on the surface of the
material.
If the Z axis of your machine is fixed, it is recommended to adjust the focus to the upper
middle position of the material when cutting the material and repeat the cutting one or
more times.
How to quickly find focus by observing low light
？
1. Adjust the suitable low light through the software. The NEJE mode can be adjusted
in the “Settings” column of the NEJE Win software; the GRBL mode can be adjusted in
the “Grbl Configuration” of the laserGRBL software, which has been explained above.