NEJE E80, Руководство пользователя

Страница: 10 / 17

Note: (Number of Passes - 1) * Z step per pass < 7mm (The standard air nozzle is designed
for cutting less than 17mm. If you want to increase the cutting of materials larger than
17mm, you can increase the cutting thickness by replacing the plane protection head +
metal air pipe.)
The NEJE E80 module adopts NEJE's unique hybrid technology. Compared with similar
products, the NEJE module has a smaller focus angle and relatively uniform XY symmetry. It
is the perfect work of NEJE after summarizing almost all 4xLD solutions. In use It can prevent
the material from igniting. However, too slow a speed setting and unreasonable focus
adjustment may cause the material to catch fire.
When cutting, according to the performance of the controller (synchronous belt equipment),
it is recommended that the cutting speed be greater than 10mm/s to avoid burning the
material. NEJE E80 has very reliable continuous working performance and supports 100%
power continuous working, but please pay attention to prevent the risk of fire. NEJE Max 4
door function can be used to extend the flame sensing and emergency stop, terminating the
job.