NEJE E80, Руководство пользователя

Страница: 3 / 17

Specification
Optical Power: Pulse 24W, CW 21W
Focus Size:
0.1×0.1mm
Input: 24V 5A
Interface: 4pin PH2.0 + ( 2pin DC 24V extra power)
Weight: 600g
Number of Diodes: 4
PWM Input: VPP(3.3-24V), Recomend 1KHz,
Quiet Design: Drive the built-in control ic, judge the working state and adjust the fan
work
Adapter Pluga: 5.5 2.1 port
Working Voltage: DC 24V
TTL&PWM Modulation: YES. Compatible with Both TTL & PWM Modulation
Input Interface: PH2.0-4Pin (+,-, PWM/TTL, Temperature), 3Pin (+,-, PWM/TTL) , 2Pin+2Pin
(+,-) + (PWM/TTL,-)
Warranty: 2 Years
FAQs
Q: Will I have to do anything for it to fix to the NEJE 3 max?
NEJE 3 Max V1.1 and above can support this module, 24V5A power supply (please pay
attention to the motherboard version).
Q: Any power test will happen? It is saying 24w?
Optical power 24W, electrical power 80W.
Q: Would this fit straight into the existing frame for a40640 master 2 max?
NEJE 2S Max is not supported, if you have NEJE 2S Max, then you need to upgrade to
NEJE 3 Max. NEJE 3 Max is supported, but you need a 24V power supply for the E80 laser
module.
Q: Is the Atomstack 130w laser module the same?
- The NEJE E80 is different from other 20W (130W is the power adapter) modules. Usage
details vary greatly. If only the power was required, the NEJE could have been sold three
years ago. Those who have used Xtool or At can see four beams of light with a large focus.
These optical systems are simply stacked. The NEJE uses more complex optical systems
inside. The reliability and performance are different. Hopefully time will vindicate
everything. NEJE has established a 2-year warranty after-sales process, and we don't want
to have any loopholes in our products. I suggest you refer to the actual work effect. NEJE
will update more actual carving and cutting videos of different materials later, which you
can watch. Fortunately, NEJE has the support of many professional users.
Q: What exactly is HYBRID TECHNOLOGY?
In fact, this problem is more complicated. The ordinary module only uses FAC lenses to
conjoin 4 beams, which will cause a problem. The included angle is relatively large and
the focus is relatively large. Of course, if compared with CO2 laser, this is still acceptable,
but there is a fundamental problem with this solution, that is, the life of the LD will be