8
CLEARSKY DPF (PG 1050 & PG1060) INSTALLATION MANUAL
Figure 13. Clamp positioning.
Installing Flex Pipe
• Install flex-pipe sliding it through the hole in the frame and then into the
DPF inlet (refer to figure 12).
• Ensure the tube is fully inserted, it must completely block the slots.
• Push clamp up against stops (refer to figure 13, item 1) and tighten to 8–9 ft-lb.
• Install the engine mount exhaust clamp (figure 14, item 2) but DO NOT tighten.
Step 7
1
Figure 14. Engine mount exhaust clamp.
Figure 12. Flex pipe.
2
CAUTION
Be careful to not damage the insulation on the pipe.
