Page 8 of 14
Front USB Configuration
The USB port is used exclusively for configuring the QueBec Pro from the
Neets Project Designer software. It can’t be used to control any external
devices.
The QueBec Pro must be powered by PoE supply that complies with IEEE
802.3 and 802.3at, type 1 in order to configure it by USB.
The USB connector for connecting to the QueBec Pro is “mini USB B 5P”. You
can buy this cable on the web (select a USB A to Mini USB B 5P).
RS-232 Status Indication
The RS-232 status LED displays the current status of the RS-232 ports.
The LEDs illuminate when there is active communication on the port.
IO Status Indication
The IO status LED displays current status of the I/Os.
When an IO is configured as input, the yellow LED marked “in” will illuminate
when the input is high and turn off when the input is low. The green LED
marked “out” will remain off.
When an IO is configured as output, the green LED marked “out” will
illuminate when the output is high and turn off when the output is low. The
yellow LED marked “in” will remain off.
Connection and Controls
Front
Number
Description
1
USB configuration input
2
RS-232 status indication
3
IO status indication
4
Relay control button / and status
indication
5
HDMI /VGA signal detection status
6
VGA signal detection status
7
Power and error indication
1
3
4
5
6
2
7
Designed in Denmark
Neets Control - QueBec Pro
on
control
config
2
1
tx
rx
in / out
1 2
in
out
relay
signal detect
on
1
2
HDMI
VGA
1
3
2
Designed in Denmark
Neets Control - QueBec Pro
on
control
config
2
1
tx
rx
in / out
1 2
in
out
relay
signal detect
on
1
2
HDMI
VGA
1
3
2
Designed in Denmark
Neets Control - QueBec Pro
on
control
config
2
1
tx
rx
in / out
1 2
in
out
relay
signal detect
on
1
2
HDMI
VGA
1
3
2
Designed in Denmark
Neets Control - QueBec Pro
on
control
config
2
1
tx
rx
in / out
1 2
in
out
relay
signal detect
on
1
2
HDMI
VGA
1
3
2
Содержание QueBec Pro
Страница 1: ...Manual QueBec Pro Installation Manual...
