Necta Colibri, Установка - Использование - Обслуживание

Страница: 27 / 52

23
© by NECTA VENDING SOLUTIONS SpA 0012 Colibrì
PROGRAMMER SETUP READING SETUP 01 <X>
SETUP READING SETUP 01 <X> Confirm?
SETUP READING
SETUP 20 <X>
PROGRAMMER CREATE SETUP SETUP 01 <X>
CREATE SETUP SETUP 01 <X> Confirm?
CREATE SETUP
SETUP 20 <X>
TRANSFERRED DATA
Data transferred with the set up is as follows:
Water and powder doses
8 price table
Prices/button status
Basic coin
Decimal point position
Payment systems
Validator operating voltage
Validator lines
Credit control
Machine type
Country
Layout
Water supply
Machine code
Machine configuration
Selection counter
Promotional message
Setting the language
Whipping time
Programming access password
Discount
Special sales
Password for Free Vend
Password for "Jug facilities"
Number of selections for "Jug facilities"
SETTING THE LANGUAGE
It is possible to change the programmer configuration as
concerns the language in which the messages are to be
displayed as well as to reset all of the data therein contained.
To activate the "Programmer configuration" operate as
follows:
- insert the programmer in its holder and start the machine.
- wait about 10" and then press the programmer buttons
"C" and "O"; the first function will be thus displayed:
LANGUAGE CONFIGURATION CONFIGURATION
CONFIGURATION ITALIAN Confirm?
CONFIGURATION
FRENCH
CONFIGURATION
GERMAN
CONFIGURATION
ENGLISH
CONFIGURATION
SPANISH
CONFIGURATION INITIALISE
INITIALISE
Confirm?
CONFIGURATION
CONFIG. END
Exit from the configuration menu
The software starts again from address 0000
(as when the machine is started)