Necta Colibri, Установка - Использование - Обслуживание

Страница: 22 / 52

18
© by NECTA VENDING SOLUTIONS SpA 0012 Colibrì
PROGRAMMING
When the programming button located on the internal side
of the push-button board (see Fig. 20) is pressed twice the
machine will go to "Programming" mode.
The message "Programming" is displayed for approx. 2
seconds, after this the first option of the programming
menu appears on the display enabling the following func-
tions:
"Present failures" reading of present failures
"Water dose" water dose setting
"Powd. dose" powder dose setting
"Set Price" price setting
"Set price/button" prices/button setting
enable/disable selections
"Basic unit / DP" basic coin value setting
and decimal point position
"Payment systems" validator
totalizator
Executive standard
Executive price holding
ECS
URW3
"Initialising" RAM initialising
"Machine code" machine identification code
setting
"Machine Config." machine configuration setting
"Selec. counter" setting the number of selections
after which the machine will lock
"Prom. message" enabling and setting the
promotional message
"Language" setting the language used to
display messages
"Whipping time" setting whipping time
for instant coffee
"Password" enabling password to access
programming
"Selec. configuration" determining the accessories
to be dispensed with each single
button.
"Discount" determining the price reduction
for selections without cup
"Special sales" setting free vend and jug
facilities parameters
"Euro" displaying prices in the local
currency and/or euro
When in "programming" mode the selection buttons have
the following functions:
1 - Previous function / Increase data item (+1)
2 - Exit function / Cancel change
3 - Machine installation
4 -
5 -
Next function / Decrease data item (- 1)
6 - Confirm function / confirm data item
7 - Change data item
8 - Reset failures
The buttons preceded by the symbol allow scrolling through
the menu or changing of data, the other buttons are used
directly for that function.
DISPLAYING PRESENT FAILURES
When the "Present failure" function from the "program-
ming" menu is displayed, pressing confirm button “ ” will
display the error code of the current failure;
when pressing button “ ” the error code of the next
applicable failure is displayed.
If no failure is currently present, pressing confirm button
“ ” will display the message "No Failure".
The possible failures are shown in the following cases:
AIR-BREAK FAILURE
The machine will lock if after dispensing water correspond-
ing to 150 pulses of the volumetric counter the microswitch
has not signalled the lack of water.
BOILER FAILURE
The machine will lock if after 10 minutes of heating from the
machine start, or from the last selection, the boiler fails to
reach the operating temperature.