Necta Colibri, Установка - Использование - Обслуживание

Страница: 25 / 52

21
© by NECTA VENDING SOLUTIONS SpA 0012 Colibrì
MACHINE CONFIGURATION
When the "Machine Config." function is displayed, the
machine configuration can be changed, and namely:
- cup dispensing / without cup
- dispensing stirrers with unsweetened selections
- water supply from the mains / internal tank
- presence of warning device for full liquid waste container
(inside cabinet)
- for instant models, before releasing the cup, dispensing
20 cc. of water to heat the coffee mixer; this function can
either be enabled or disabled.
Press the confirm button “ ” to display the current status;
when pressing the correction button “ ” the status blinks
and can be changed with the “ ” and “ ” buttons.
IMPORTANT NOTICE!!!
When the machine is initialised, the configuration will
be assigned the default values "/with cup/with stirrer/
without mixer heating/without full waste container
warning device".
THEREFORE, AFTER INITIALISING THE MACHINE
MUST BE RECONFIGURED.
SELECTION COUNTER
This function is used to lock the machine after a preset
number of coffee selections, and a preset number of
instant selections.
Since this is a control tool used only by the vending
manager, a 4-digit password must be entered.
After entering the password, the number of selections,
after which the machine locks, can be set, the number of
selections already made can be read and the lock counter
can be reset.
N.B.: The counters are set to zero by default;
With the counters set to zero, this function is disabled.
SETTING THE PROMOTIONAL MESSAGE
When this menu is displayed, press the confirm button “ ”
to display whether the message is enabled or not (ON/
OFF).
If the message is enabled, when pressing the confirm
button “ ” the first character will blink, which can then be
changed.
The buttons will be assigned the following functions:
1 - Previous character
2 - Next character
3 - Upper case/lower case
The values are displayed one after the other by pressing
the button.
The message is stored by pressing button "2” when on the
last position.
SELECTING THE LANGUAGE
This function is used to select the language to be used for
displaying the messages.
The available languages are: Italian, French, English,
Spanish, Portuguese and German.
WHIPPING TIME
This function is used to define how long (in tenths of a
second) instant coffee is to be whipped according to the
amount of drink to be obtained.
PROGRAMMING ACCESS PASSWORD
This function is used to enable the request for a password
to access the programming procedures.
The password is composed the sequence of buttons 1 1 2
2 and cannot be changed.
SELECTION CONFIGURATION
This function is used to determine, as an exception to the
machine configuration, which accessories should or should
not be dispensed for a single selection.
The following is possible for each selection button (1 to 8,
excluding the pre-selection buttons):
- not dispense the cup (if the machine configuration in-
cludes the cup, but not vice versa);
- not dispense the stirrer if the selection is unsweetened;
- not dispense sugar and stirrer for selections which are
defined as sweetened (but not dispense sugar for selec-
tions which are defined as unsweetened).
The settings defined with the selection configuration are
used also for complete test selections.
DISCOUNT
This function is used to define the price reduction (in basic
coins) to be applied to the pre-selection "without cup".