Necta Colibri, Установка - Использование - Обслуживание

Страница: 24 / 52

20
© by NECTA VENDING SOLUTIONS SpA 0012 Colibrì
PROGRAMMING THE BASIC
COIN AND THE DECIMAL POINT
When the "Basic unit / DP" (basic coin value) function of
the "programming" menu is displayed, the value of the
basic coin as well as the position of the decimal point can
be modified.
Pressing the confirm button “ ” from the "programming"
menu will display the current value of the basic coin.
By using the “ ” and “ ” buttons, the display will alternate
between the value of the basic coin and the number of the
decimal point position "DP", i.e.:
0 disabled decimal point
1 XXX.X
2 XX.XX
3 X.XXX
When pressing the correction button “ ”, these values will
be blinking and can be modified as necessary.
PAYMENT SYSTEMS
When the "Payment system" function is displayed, it is
possible to define which payment system with Executive
communication protocol to use, selecting among:
Validator
Totalizator
Executive standard
Executive price holding
ECS
URW3
In order to instal payment systems different from the
validator or cashless, special kits must be used.
The payment systems must be housed in the cabinet
(optional).
PROGRAMMING THE VALIDATOR
If the selected payment system is a validator, the param-
eters with which operate must be defined.
CREDIT CONTROL
It is possible to decide whether to cash the excess credit
paid or to leave it available to the user.
OPERATING VOLTAGE
According to the type of validator it necessary to select the
operating voltage, 12 V or 24 V.
VALIDATOR LINES
When the "Validator lines" function (line programming) is
displayed, the value of the 6 validator coin lines can be
changed.
The value of the lines is expressed in number of basic
coins.
Press the confirm button “ ” from the "programming"
menu to access the list of lines, which can be scrolled with
the “ ” and “ ” buttons.
When pressing correction button “ ”, this value will be
displayed blinking and can be modified as necessary.
INITIALISING
When the "Initialising" function is displayed, the machine
can be initialised, thus resetting all default data.
This function is used in case of stored data error or
replacement of the EPROM.
All statistical data are reset.
Press the confirm button “ ” and message "Confirm?" is
displayed. Press the button “ ” again to display the first
variable parameter to define the machine configuration.
The available options (blinking) can be scrolled with the “ ”
and “ ” buttons, the selection is confirmed with button " "
and the next parameter is presented. When pressing
button “ " after the last parameter the display will show the
message "Working" for a few seconds and the machine is
initialised.
The parameters are as follows:
"Machine type" C - Espresso
I - Instant
"Country" Type of doses to be used for the
selections
"Layout" Layout of containers and
selection menu from the
available ones
"Tank" Water supply from the mains or
from a tank
SETTING THE MACHINE CODE
When the "Machine code" function is displayed the iden-
tification code number of the machine can be changed
(from the default 0000 to a number up to 9999).
Press the confirm button “ ” to display the current code;
when pressing the correction button “ ” the first digit will
blink.
The value of the blinking digit can be increased or de-
creased with the “ ” and “ ” buttons.
When pressing the confirm button “ ”, the blinking digit will
be given the displayed value and the next digit starts
blinking.