Necta Vending Solutions SpA Zeta CB Series, Установка - Использование - Обслуживание

Страница: 9 / 40

45
© by NECTA VENDING SOLUTIONS SpA 01 10 126-03
Fig. 4
VARIABLE COMBINATION LOCK
Some machine models are fitted with a variable combina-
tion lock.
The lock is supplied with two silver colour keys to be used
for normal opening and closing.
The lock can be customised by using a kit, available as
accessory, which permits the combination of the lock to be
changed.
This kit includes a change key (black) for the current lock
combination as well as the change (gold) and use (silver)
keys for the new combination.
Sets of change and use keys with other combinations can
be supplied on request.
Additional sets of use keys (silver) may be requested,
indicating the combination stamped on the keys.
Generally, only the use key (silver) is used, while the
combination change keys (gold) can be kept as spares.
Do not use the change key for normal opening, as it may
damage the lock.
To change combination do as follows:
- insert the current change key (black) and rotate to the
change position (reference notch at 120°);
- remove the current change key and insert the new
change key (gold);
- rotate to the close position (0°) and remove the change
key.
The lock will now have the new combination.
The keys with the old combination cannot be used for
the new combination.
LOADING AND CLEANING
DOOR SWITCH
When opening the door a special micro-switch disconnects
the power from the electrical system of the machine, to
allow the loading and routine cleaning operations described
below in full safety.
All operations requiring the machine to be energised
must be carried out EXCLUSIVELY by qualified per-
sonnel, aware of the specific risks of such condition.
Fig. 5
1 - Door switch
2 - Vending motors' switch
3 - Adjustable thermostat
DISPENSING MODULES
To get the best possible use of the machine based on the
available internal space, the number of selections and the
size of the dispensed products, the machines belonging to
this range can be equipped with three different types of
dispensing devices, i.e.:
- a dispensing module for cans;
- single columns;
- double columns.
Each machine can have a dispensing module for cans and
a variable number of columns according to the model.
Each device is set to dispense only one type of product with
precise dimensional characteristics.
Before loading the machine, it is therefore essential to
know exactly the type of product for which the device
was set.
DISPENSING MODULE FOR CANS
(where installed)
The module (toboggan), installed on the left hand side of the
machine, is used to dispense four different types of drink
and can be adjusted for 250, 330 or 355 cc cans.
The selections, from top to bottom, coincide with the order
of the first four selection buttons and have a maximum
capacity of:
- 25 cans for the first selection
- 23 cans for the second selection
- 19 cans for the third selection
- 15 cans for the fourth selection