10 (E)
- Model N422E, N420E -
FUNCTION OF EACH PART
A. START/STOP BUTTON
The machine will start running when start/stop button is pressed and will stop when pressed
the second time. The machine will rotate slowly at start of sewing.
MONITOR LAMP
Green Light “ON”
Ready to sew or bobbin winding.
Red Light “ON”
Presser foot is not in down position or buttonhole lever is not lowered.
If the red light is on, the machine will not start even when start/stop button is pressed.
Note:
If the upper thread is not threaded, the
machine will stop. (Upper thread sensor)
When the foot controller is connected, start/
stop button will be disactivated.
B. REVERSE BUTTON
The machine will continue to sew in reverse
at low speed while this button is pressed and
stop when this button is released.
Note:
When the foot controller is connected,
machine will sew in reverse (at low speed)
while this button is pressed. When released,
machine will sew forward.
C. SLOW BUTTON
While sewing,
by pressing this button,
machine will sew in slow speed. Pressing
this button again, the speed will return.
D. SPEED CONTROL BUTTON
The machine will sew faster when the button
is slided to the right, and sew slower when
button is slided to the left.
Note:
When the foot controller is connected, this
button limit the maximum speed.
