2-2 Docking and Undocking
NOTE
If you need to replace the MiniDock power cable, make sure it
meets the following specifications.
In North America, the cable should be rated for 120 V, 7 A. The
plug is a NEMA 5-15P. Use an SVT or SJT 18/3 AWG cable that
is less than 15 feet (4.5 m) long. Use connector type IEC320.
In Europe, the cable should be rated for 230 V (220-240 V), 10 A.
The plug is country-specific. Use an H05VV-F or H05VVH2-F
cable that is less than 15 feet (4.5 m) long. The connector type is
EN60320.
Connect the power cable as follows.
1.
Position the MiniDock on a flat surface close to an AC outlet.
2.
Attach one end of the cable to the AC power port on the MiniDock.
3.
Attach the other end to a properly grounded wall outlet.
Connecting the power cable
