background image

 

 First Printing — July 1997

Copyright 1997

Copyright 1997

NEC Computer Systems Division

NEC Corporation

Packard Bell NEC, Inc.

7-1 Shiba 5-Chome, Minato-Ku

1414 Massachusetts Avenue 

Tokyo 108-01, Japan

Boxborough, MA   01719

All Rights Reserved

All Rights Reserved

 

PROPRIETARY NOTICE AND LIABILITY DISCLAIMER

 The information disclosed in this document, including all designs and related materials, is the
valuable property of NEC Computer Systems Division, Packard Bell NEC (NECCSD,
PBNEC) and/or its licensors. NECCSD and/or its licensors, as appropriate, reserve all pat-
ent, copyright and other proprietary rights to this document, including all design, manufactur-
ing, reproduction, use, and sales rights thereto, except to the extent said rights are expressly
granted to others.

 The NECCSD product(s) discussed in this document are warranted in accordance with the
terms of the Warranty Statement accompanying each product. However, actual performance
of each such product is dependent upon factors such as system configuration, customer data,
and operator control. Since implementation by customers of each product may vary, the
suitability of specific product configurations and applications must be determined by the
customer and is not warranted by NECCSD.

 To allow for design and specification improvements, the information in this document is
subject to change at any time, without notice. Reproduction of this document or portions
thereof without prior written approval of NECCSD is prohibited.

NEC is a registered trademark of NEC Corporation; Versa is a U.S. registered trademark of NEC Technologies, Inc.;

MiniDock 6000 is a U.S. trademark of NEC Technologies, Inc.; all are used under license by NEC Computer Systems
Division (NECCSD) Packard Bell NEC, Inc.

All other product, brand, or trade names used in this publication are the trademarks or registered trademarks of their respective

trademark owners.

Содержание VERSA MINIDOCK 6000









































































Отзывы: