2-26 Setup and Operation
5.
Replace the battery bay cover as follows:
Align the tabs on the battery cover with the notches in the system.
Lower the cover onto the system.
Slide the cover towards the middle of the unit. Tuck the tabs on the back of
the cover under the chassis.
Figure Section 2-11 Battery Bay Cover Replacement
Saving Battery Power
The system utilizes two power conserving states: Active and Suspend mode. The system
automatically switches between these modes to conserve battery power and prolong battery
life. To save additional power, use the following guidelines:
put the system in Suspend mode when you need to leave the system for a short
time
reduce the LCD's brightness using the Fn F5 hot key to toggle the LCD backlight
between standard or full
turn off the system when not in use.
The system also integrates automatic power-saving features. Refer to Table Section 2-7 for
a complete description.
Notch
Tab
Notch