NEC UX5000, Руководство пользователя

Страница: 47 / 180

Conference
Page - 41
Conference
Conference lets you add additional inside and outside callers to your conversation. With Conference, you
can set up a multiple-party meeting without leaving the office.
In addition to Conference, there are other ways to have a meeting. See Voice Call Conference (page 42),
Meet Me Conference (page 79), Meet Me Paging (page 81) and Tandem Trunking (page 140).
To set up a Conference:
1. Place or answer call.
2. CONF or FUNCTION (Conference).
3. Place the next call.
To access the outside call, either press LINE or dial a trunk access code. See Outside Calls on
page 103 and page 105 for more.
If the second call to be conferenced is ringing in, place the first call on hold, answer the ringing
call, then follow the steps below.
4.
CONF
or
FUNCTION
(Conference).
You may be able to have up to 32 callers. Repeat this step to add more parties.
5. After adding all parties, press CONF again to begin the Conference.
Split (separate) the Conference calls by pressing HOLD + 894.
To exit a Conference (without affecting the other parties):
1. SPK to hang up.
You can set up a Conference with two outside callers and then drop out of the call - leaving the
callers talking in an Unsupervised Conference. Refer to Tandem Trunking on page 140 for more.