NEC UNIVERGE UM8500 страница 241 Скачать руководство пользователя

Страница: 241 / 352

NEC UNIVERGE SV8300

USING

OAI

231

TMFC-Record:

Enter the Terminal Mode Function Code for the Record

command for Live Record. The default value is 192 as this is the predefined
function in the phone system, but can be changed if needed.

TMFC-Pause:

Enter the Terminal Mode Function Code for the Pause

command for the Live Record. The default value is 193 as this is the
predefined function in the phone system, but can be changed if needed.

TMFC-ReRecord:

Enter the Terminal Mode Function Code for the

ReRecord command for Live Record. The default value is 194 as this is the
predefined function in the phone system, but can be changed if needed.

TMFC-End:

Enter the Terminal Mode Function Code for the End command

for Live Record. The default value is 195 as this is the predefined function in
the phone system, but can be changed if needed.

KC-Record:

Enter the OAI Key Code used for the Record command on a

Dterm function key. To disable monitoring of the key, enter 0 or a negative
number. The default value is 1.

KC-Pause:

Enter the OAI Key Code used for the Pause/Resume command

on a Dterm function key. To disable monitoring of the key, enter 0 or a
negative number. The default value is 2.

KC-Rerecord:

Enter the OAI Key Code used for the ReRecord command on

a Dterm function key. To disable monitoring of the key, enter 0 or a negative
number. The default value is 3.

KC-End:

Enter the OAI Key Code used for the End command on a Dterm

function key. To disable monitoring of the key, enter 0 or a negative number.
The default value is 4.

ToggleStartStop:

This feature allows the user to press a single key to start,

stop, or restart a Live Record session. To enable the feature, enter True. To
disable the feature, enter False. The default value is True.

If using a template that enables the OAI UCD-MCI serial integration, in the
navigation panel of the configuration file, expand the MCI-Serial node.

The settings must match the settings of the phone system for the MCI Serial
connection.

Format:

Set the format of the MCI-Serial packets expected from the phone

system. Enter

ICS

for regular (ICS/IVS) serial packets, or

IMX

for expanded

(IMX) packets. The default is ICS.

COMPort:

Enter the COM number of the serial port. This is the voice server

serial port that is connected by the RS-232 cable to the MCI link on the phone
system. Accepted values are

COM1

COM2

. The default is COM1.

BaudRate:

Enter the baud rate used by the serial (RS-232/MCI)

communication. The value must be identical to the phone system setting.
Accepted values are

1200

2400

4800

9600

, or the specially defined

phone system setting. The default value is 9600.

DataBits:

Enter the default phone system data bits. Accepted values are

, or

. The default value is 8.

Parity:

Enter the parity used by the serial (RS-232/MCI) communication

with the phone system. Accepted values are

for NONE,

for EVEN, or

for

ODD. The default value is N.

StopBits:

Enter the stop bits used by the serial (RS-232/MCI)

communication with the phone system. Accepted values are

1.5

or the

specially defined phone system setting. The default value is 1.

NOTE

Do not complete this step if a template other than the NEC IPS
2000 OAI-UCD-MCI template or the NEC 2000 IVS-OAI-UCD-MCI
template was selected.

Содержание UNIVERGE UM8500

































































































































































































































































































































































Результаты поиска

Содержание UNIVERGE UM8500

Отзывы:

Похожие инструкции для UNIVERGE UM8500

Бренды по названию

Популярные бренды

NEC UNIVERGE UM8500, Руководство по интеграции

Результаты поиска

Содержание UNIVERGE UM8500

Отзывы:

Похожие инструкции для UNIVERGE UM8500

Бренды по названию

Популярные бренды