NEC UNIVERGE UM8500, Руководство по интеграции

Страница: 42 / 352

UNIVERGE UM8500 I
NTEGRATION
G
UIDE
32
To add uOne ports to CallManager version 3.05
Add one uOne port to CallManager for each port that is being connected to the
messaging system.
1
In the Cisco CallManager Administration program, click
Device
>
Add a
New Device
.
2
On the Add a New Device page, under
Device type
, click
Cisco uOne Port
.
3
Click
Next
, and the Cisco uOnePort Configuration page appears.
4
Enter values as shown in the table below.
5
Click
Insert
.
6
To add another uOne port, click
New
. When all the ports have been added,
skip to step 8 .
7
Repeat steps 4 through 6 for each additional port.
8
Close the CallManager Administration program, then continue with the
following procedure,“
To specify MWI and voice mail extensions in
CallManager version 3.05 ” on page 33
NOTE
uOne ports and phones must be in the same calling search space,
or the integration will not work.
Field Value
Device name A name for the voice mail port, for example, “UM8500-1.” Follow these instructions:
●
In general, use the same prefix for every port, for example, “UM8500-.”
However, if CallManager is sending calls to more than one UNIVERGE UM8500
server, use a different prefix for the CallManager ports that are being connected
to each UNIVERGE UM8500 server, for example,”UM85001-” and “UM85002-.”
●
Use prefixes that are 12 characters or less.
●
Number the ports beginning with 1 and continuing in sequence.
●
Do not begin port numbers with 0. For example, “UM8500-1” is a valid value;
“UM8500-0” is not.
CAUTION! If a uOne port is given a device name that does not
conform to these conventions, UM8500 can not receive calls
from that port.
Description This field is automatically filled in with the name typed in the Device name field.
These characters can be deleted and a new description can be typed.
Device pool Click Default pool .
Location Accept the default value of None .
Directory number The extension that will be connected to UM8500.
Forward all This field should be left blank.
CAUTION!
Do not set a value for this field. If information appears in this
field, UM8500 might operate improperly.
Forward busy The extension of the next uOne port in sequence. If this extension is the last uOne
port, then type the extension of the first uOne port. Alternatively, the last uOne port
can be forwarded to the operator’s extension. If the directory number for this uOne
port is busy, calls are forwarded to the extension shown in this field.
Forward no answer The extension of the next uOne port in sequence. If this extension is the last uOne
port, then type the extension of the first uOne port. Alternatively, the last uOne port
can be forwarded to the operator’s extension.
If the directory number for this uOne port is not answered, calls are forwarded to the
extension shown in this field.
Forward no answer is set in the event the port is disabled or out of service.