NEC Univerge UM8000, Руководство по установке

Страница: 85 / 130

UM8000 Issue No. 1.0
Installation Manual 10 - 3
S
ECTION
3
E-
MAIL
I
NTEGRATION
S
ET
U
P
The following is a summary of the steps required to set up the e-mail integration.
1. Configure the voice messaging system server.
Set up the information for the outgoing e-mail server connected to the voice mes-
saging system.
2. Configure the e-mail server.
The e-mail server must be configured to properly integrate with the voice mes-
saging system.
Supported e-mail servers are:
X
Microsoft® Exchange 2000 or 2003
X
Lotus® Domino™ 6.0, 6.5, or 7.0
X
Novell GroupWise
®
6.0, 6.5 or 7.0
Refer to the appropriate e-mail server documentation to configure the e-mail
server.
3. Set up subscribers.
After the e-mail server and the voice messaging system have been configured,
configure subscriber mailboxes to access e-mail.
S
ECTION
4
C
ONFIGURING THE
E-
MAIL
S
ERVERS
The e-mail server must have SMTP, POP3 and IMAP enabled to use the e-mail
integration.
To enable
SMTP
and IMAP refer to the e-mail server documentation or consult the
system administrator about which settings are appropriate for the organization.
4.1 Setting the E-mail Server Configuration
The following configuration settings must be set for the e-mail server.
WARNING
The e-mail administrator is required to configure the e-mail server.
WARNING
The e-mail administrator is required to configure the e-mail server.
E-mail Server Required Protocols
Microsoft Exchange IMAP, MIME, PLAIN, and LOGIN for outgoing messages
Lotus Notes Domino IMAP, PLAIN, and LOGIN for outgoing messages
GroupWise
IMAP4, PLAIN, and LOGIN for outgoing messages, SMTP
Relay - Allow message relaying