NEC Univerge UM8000, Руководство по установке

Страница: 115 / 130

UM8000 Issue No. 1.0
Installation Manual 13 - 9
3. In the Multi-Protocol Transport Services dialog box,
click
Configure
.
4. In the Configure dialog box, click
LAN Adapters and
Protocols
, then click
Configure
. The Adapter and
Protocol Configuration dialog box appears.
5. In Current Configuration click
IBM OS/2 NetBIOS over
TCP/IP
, then click
Edit
.
6. Click
Broadcast list
, then click
Configure
.
7. Make sure the IP address listed in the broadcast list
is the correct IP address of the Primary Domain
Controller (PDC) for the Windows domain.
Consult with your network administrator to determine
the correct PDC IP address.
8. Click
OK
to apply the change.
9. Click
Close
to close the Configure dialog box.
10. Click
Exit
to close the Multi-Protocol Transport
Services application.
11. Double-click the
Shutdown
icon on the desktop to
restart OS/2.
1.4.2.4 Logging On to the Windows Domain or Workgroup Using
NetBIOS
1. On the voice messaging system, go to an OS/2
command prompt.
2. The command options used depend on if you are
logging on to a domain or a workgroup:
Domain
Type:
logon <userid> /p:<password>
/d:<domain> <ENTER>
Where
user id
=
Windows user name
password
=
Windows password
domain
=
Windows domain name
Workgroup
Type:
logon <userid> /p:<password>
<ENTER>
Where
userid
=
Windows user name
password
=
Windows password