NEC Univerge UM8000, Руководство по установке

Страница: 63 / 130

UM8000 Issue No. 1.0
Installation Manual 8 - 7
S
ECTION
3
S
ETTING
U
P
S
OFT
K
EYS
Use the phone system programming interface (either a CAT phone or a SV8300
PCPro) to enter the phone system programming commands.
3.1 Enabling Soft Key Call Screening
Enable soft key call screening systemwide.
3.2 Enabling the Voice Messaging Ports for Soft Keys
Enable all voice messaging ports for soft keys.
S
ECTION
4
S
ETTING
U
P
L
IVE
R
ECORD
A subscriber can record phone conversations using their phone or using ViewMail. For
more information about ViewMail, see About Visual Messaging on page 84.
R
To record conversations using ViewMail, a barge-in code and executive override
must be configured on the phone system, and call forward busy must be disabled
on each phone extension recording from ViewMail. A barge-in code is a key
sequence that the phone system dials to activate executive override (or silent
monitor) to begin the recording. See your phone system documentation for more
information.
R
To record conversations using a phone, the phone system and the subscriber’s
extension must be configured properly. The procedures to do this are described
later in this chapter.
Command Code: 08
First Data: 715
Second Data: 0
Command Code: 1337
First Data: < xxx >
Where < xxx > is the voice messaging port
extension number.
Second Data: 0
NOTE
Repeat this command for each voice messaging extension on the
UM8000
blade.