NEC Univerge UM8000, Руководство по установке

Страница: 65 / 130

UM8000 Issue No. 1.0
Installation Manual 8 - 9
3. Enable automatic live record for trunk calls, optional.
4.2 Configuring Live Record on a Subscriber’s Extension
Do this procedure for each subscriber extension that will use live record.
1. Enable message waiting service for the extension.
2. Set the Prime Line for the extension.
3. Assign live record line key functions.
Command Code: 3522
First Data: xx
Where < xx > is the trunk route
number.
Second Data: 0
Where 0 enables automatic live
record for systemwide and
1 disables automatic live record
systemwide.
Command Code: 1303
First Data: xxx
Where < xxx > is the subscriber’s
extension number.
Second Data: 0
Command Code: 93
First Data: xxx
Where < xxx > is the subscriber’s
extension number.
Second Data: xxx
Where < xxx > is the subscriber’s
extension number.
Command Code: 9000
First Data: xxx, yyy
Where < xxx > is the subscriber’s
extension number and
<yyy> is the line key.
Second Data: F1091
Where F1091 = Record.