![background image](http://html.mh-extra.com/html/nec/superscript-150c/superscript-150c_user-manual_250193058.webp)
Printing
During a printing operation, do not stop the print head
manually or touch the area within the print head carriage
path.
1.
Printer does not print/receive data.
•
Check that the printer is connected to the electrical
power supply and On Line (the Power and On Line light
indicators on the operator panel should be lit).
•
Check the physical (cables) and logical (application and
driver) connections between the printer and host.
•
Check that host system is switched on.
•
If you have an “ECP” computer, check that its printer
port is Printer Port: LPTx. If necessary, change the port
setting in your system properties (see point 5 in
“
Installation”).
•
If the print head carriage does not move and the Power
and On Line light indicators flash rapidly, disconnect and
reconnect the printer to the electrical power supply. If
the Power and On Line light indicators continue to flash
rapidly, call the Technical Support Service.
•
Check that you have removed the protective film from
the print head.
•
If the Power and On Line light indicators flash slowly,
open the top cover to see the error condition indicated
by the print head carriage position.
•
Check whether the printer is in the special functions
mode (printer powered but both light indicators off).
2.
Printing stops.
•
If the On Line and Power light indicators flash
simultaneously, open the top cover to see the error
condition indicated by the print head carriage position.
•
If only half or three-quarters of your page is printed and
you have an “ECP” computer, check that its printer port
is Printer Port: LPTx. If necessary, change the port
setting in your system properties (see point 5 in
“Installation”).
•
Check that paper is present and that it loads correctly.
If there is no paper in the printer, load up to 40 sheets of
paper in the ASF and press the Form Feed key on the
operator panel.
See Chapter 3 for the correct paper loading procedure.
•
Change the print head.
See Chapter 2 for replacing the print head.
•
Printing stops in the middle of the print job and the page
is ejected; check that the printer port on your PC is
Printer Port: LPTx. If necessary, change the port
setting in your system properties (see point 5 in
“
Installation”).
5-8
Troubleshooting
Содержание SuperScript 150C
