NEC SL1100, Сетевое руководство

Страница: 35 / 292

NEC SL1100 Issue 6.0
Networking Manual 5 - 3
5. Dial the system pa Hold .
Refer to the following table for the default system passwords. To change the
passwords, use 90-02: Programming Password Setup.
S
ECTION
3
H
OW TO
E
XIT
P
ROGRAMMING
M
ODE
To exit the programming mode:
To exit programming mode, first exit the programming options mode.
1. Press Mute to exit program options, if needed.
2. Press Speaker . If changes were made to the system programming, Saving
System Data is displayed.
3. When completed, the display shows Complete Data Save and exits the
telephone to idle.

To save a customer database, a blank Compact Flash (CF) is required.
Insert the CF into the CD-CP00-US and, using Program 90-03, save the
software to the Compact Flash. (Program 90-04 is used to reload the
customer data if necessary.) Note that a Compact Flash can hold only one
customer database. Each database to be saved requires a separate card.
Password
User
Name
Level Programs at this Level
12345678 sltech 2 (IN) Installation(IN): All programs in this section not listed
for MF, SA, and SB
0000 ADMIN1 3 (SA) System Administrator - Level 1 (SA):
10-01, 10-02, 10-12, 10-13, 10-14, 10-15, 10-16, 10-17,
10-18, 10-23, 10-24, 10-25, 10-28, 10-29, 10-45, 12-02,
12-03, 12-04, 12-08, 15-01, 15-07,1 5-09, 15-10, 15-11,
20-16, 20-34, 21-07, 21-14, 22-04, 22-11, 22-17, 25-08,
30-03, 30-04, 32-02, 45-02, 84-22, 90-03, 90-04, 90-06,
90-07, 90-19, 90-57, 90-58, 90-59, 90-65
9999 ADMIN2 4 (SB) System Administrator - Level 2 (SB):
13-04, 13-05, 13-06, 13-11, 15-14, 21-20
Program Mode
Base Service OP1 OP2