NEC SL1100, Сетевое руководство

Страница: 263 / 292

NEC SL1100 Issue 6.0
Networking Manual 13 - 21
Call Routing - Outbound
Program
Number
Program Name/Description Assigned Data
11-01-01 System Numbering
This program is used to assign the Trunk Access
code (9 by default) and the special trunk access
code (unassigned at default).
The trunk access code used to make alternate
calls must be set to a type 4 (special trunk access
code).
0 = Not Used
1 = Service Code
2 = Extension Number
3 = Trunk Access Code
4 = Individual Trunk Access
5 = Operator Access
6 = F-Route Access
8 = Networking System Access
9 = Dial Extension Analyze
(Refer to the SL1100 programming manual for
the default values of all tables)
11-09-01 Trunk Access Code
Use this program to assign the trunk access code
defined in program 11-01-01. This is the access
code that users will dial to make outbound calls.
Maximum of 4 digits
(0~9, *, #,)
(default =9)
11-09-02 2
nd
Trunk Route Access Code
Use this program to assign the special trunk
access code defined in program 11-01-01. Users
dial this access code to make outbound calls from
a different trunk group rather than using the
primary trunk group access code.
Maximum of 4 digits
(0~9, *, #,)
(default =not assigned)
21-02-01 Trunk Group Routing for Extensions
This assigns extensions per day/night mode to a
route table (program 14-06-01).
This program follows the trunk access code in
PRG 11-01-01 and 11-09-01.
0 = No Setting
(Calls will not route)
1~25 = Route Table 1~25
(default =1)
21-15-01 Individual Trunk Group Routing for Extensions
This assigns extensions per day/night mode to a
route table (program 14-06-01).
This program follows the “special trunk” access
code from PRG 11-01-01 and 11-09-02.
0 = No Setting
(Calls will not route)
1~25 = Route Table 1~25
(default =0)