NEC SL1100, Сетевое руководство

Страница: 146 / 292

Issue 6.0 NEC SL1100
9 - 12 IP Multiline Station (SIP)
S
ECTION
7
IP P
HONE
P
ROGRAMMING
I
NTERFACE
This section describes how to access the programming interface for IP Phones. The
following describes how to access the User Menu.
1. Using a DR700 telephone, press HOLD - Transfer - * - # buttons to enter program
mode. The IP User Menu is displayed.
2. On the IP User Menu, enter the user name and password for the IP Phone.
Settings are listed in
Table 9-1 IP Phone Programming Options User Menu .
S
ECTION
8
DHCP S
ERVER
C
ONFIGURATION
It is possible to use either an external DHCP server (e.g., Windows 2003 Server) or
the NEC SL1100 internal DHCP server. With IP Phones, either of these options
requires the DHCP server to be configured to supply the IP terminal options.
If using the internal DHCP server, enable the DHCP server. Refer to 6.2 Example
Configuration 2 - Dynamic IP Addressing, One LAN on page 9-9 .
Programming - CPU:
10-12-01 : CPU Network Setup - IP Address
10-12-10 : CPU Network Setup - Subnet Mask
10-12-03 : CPU Network Setup - Default Gateway
10-12-09 : CPU Network Setup - VoIPDB IP Address
(
This assignment is for when the VoIP daughter board is
installed.)
0.0.0.0
255.255.255.0
198.168.1.254
192.168.1.20
Programming - VoIPDB DSP:
84-26-01 : VoIPDB Basic Setup - IP Address (Slot # - DSP) 192.168.1.21
Programming - IP Phones:
DHCP Mode:
IP Address:
Subnet Mask: Disabled
192.168.2.200
255.255.255.0
198.168.2.254
Table 9-1 IP Phone Programming Options User Menu
Programming Option Default
UserName ADMIN
Password 6633222