NEC SILENTWRITER SUPERSCRIPT 660, Руководство пользователя

Страница: 130 / 313

6–14 Selecting Paper and Media
All adhesive label paper properties must match the
specifications listed in Table 6-3.
Adhesive
Labels
Table 6-3 Label Specifications
ITEM
Calliper
Construction
Curl
Electrical surface resistivity
Electrical volume resistivity
Finishing
Fusing capability
Packaging
Shelf life
Smoothness
SPECIFICATION
No more than 0.0075 inch (0.19 mm)
The label stock must provide good toner adhesion.
No adhesive can be on the external label surfaces.
General label attachment/die-cutting cannot allow
for peeling during transport, printing, or electrical
fusing. Labels should cover the entire carrier
sheet.
Zero curl toward image side, minimum 30-degree
radius curl toward opposite side. Curl must be
within specifications after heating at 200˚C
(392˚F) for 0.1 second.
2.0 to 15
×
10
10
ohms/square.
1.2 to 15
×
10
11
ohms-centimeter.
Cut sheets must be within ±0.0313 inch of nomi-
nal, corners at 90˚ ±0.2˚.
Cannot scorch, melt, offset, or release hazardous
emissions when heated to 200˚C (392˚F) for 0.1
second.
Moisture-proof wrap.
One year (minimum) stored at 22˚C (71.6˚F) at
50% relative humidity.
100 to 250, Sheffield scale.