Section 6
Repair
DISASSEMBLY AND REASSEMBLY
This section contains step-by-step disassembly procedures for the computer. The CD-ROM
reader, hard disk drive, and 3 1/2-inch diskette drive are installed and included in these dis-
assembly procedures. Reassembly is the reverse of disassembly. Each procedure is sup-
ported by a simplified disassembly illustration to facilitate removal. The detailed exploded-
view diagram and parts lists for the system are shown later in this section.
A Phillips-head screwdriver is the only required tool. For complete disassembly of the
system unit, follow the disassembly order listed in Table Section 6-1. To reassemble, fol-
low the table in reverse order.
Individual removal procedures do not require the total disassembly of the computer. Each
of the following subsections lists the parts that must be removed before beginning the re-
moval procedure. To reassemble, follow the procedure in reverse order.
Table Section 6-1 PowerMate V466 Minitower Disassembly Sequence
Sequence
Part
See Page
1
Top cover
6-3
2
Expansion board(s)
6-4
3
PCI/ISA-Bus backboard
6-6
4
Front panel assembly
6-7
5
Speaker assembly
6-9
6
Secondary cache and SIMM memory
6-10
7
3 1/2-inch diskette drive
6-11
8
3 1/2-inch hard disk drive
6-13
9
5 1/4-inch device cage
6-16
10
5 1/4-inch device
6-15
11
Power supply
6-17
12
System board
6-18
13
Battery
6-20
