NEC POWERMATE P - SERVICE MANUAL 1995, Инструкция по обслуживанию и справочник

Страница: 64 / 171

Setup and Operation 2-27
Exit Saving Changes
After making your selections on the Setup menus, always select “Exit Saving Changes” to
make them operative.
When “Exit Saving Changes,” has been selected, the program displays this message:
Exit Saving Changes?
Press Enter to Continue
Press ESC to Abort
To save the changes and exit Setup press
Enter
. Press
Esc
to return to the Exit submenu
without affecting your changes.
Exit Discarding Changes
Use this option to exit Setup without recording any changes you may have made. After you
select “Exit Discarding Changes, the program displays this message:
Exit Discarding Changes?
Press Enter to Continue
Press ESC to Abort
To exit Setup without saving the changes press Enter . Press Esc to return to the Exit
submenu without affecting your changes.
Load Setup Defaults
To load all the default Setup values in the Setup menus, select “Load Setup Defaults” from
the Exit Submenu. Reloading the defaults does not affect the any set passwords. The
program displays this message:
Load Setup Defaults?
Press Enter to Continue
Press ESC to Abort
To load the defaults shipped with the system press
Enter
. Press
Esc
to return to the Exit
submenu without affecting your changes.
Discard Changes
To undo any changes you have made in the Setup menus in since Setup was last saved,
select “Discard Changes.” The program displays this message:
Discard Changes?
Press Enter to Continue
Press ESC to Abort
To reset all changes made in the current session of Setup, press Enter . Press Esc to return
to the Exit submenu without affecting your changes.