Repair 5-9
Speaker Assembly Removal
Remove the speaker per Figure Section 5-11 and the following steps.
1.
Remove the side panel as previously described.
2.
Remove the board edge guide/fan assembly as previously described.
3.
Unplug the speaker from its connector on the system board (see Appendix A for
connector assignments).
4.
Slide the speaker out from the four speaker tabs.
Figure Section 5-11 Speaker Tabs
5.
Remove the speaker from the system unit.
3 1/2-inch Diskette Drive Removal
Remove the 3 1/2-inch diskette drive as follows.
1.
Remove the side panel as previously described (see “Side Panel Removal”).
2.
Unplug the diskette drive power cable and signal cable from the diskette drive
(see Figure Section 5-13).
NOTE:
When reinstalling the diskette drive,
note that all power cables are keyed to fit only in
the correct position. The red edge of the diskette
drive signal cable is positioned as shown.
1 of 4
Tabs
To Connector
on System Board
Front of System
Uniit Chassis
Содержание POWERMATE P - SERVICE MANUAL 1995
Страница 1: ...PowerMate P Series PowerMate Service and Reference Manual Printed in U S A 9 95 819 181365 000 Rev 00 ...
Страница 37: ...1 22 Technical Information ...
Страница 169: ...Index 5 ...