NEC POWERMATE P - SERVICE MANUAL 1995, Инструкция по обслуживанию и справочник

Страница: 39 / 171

2-2 Setup and Operation
SYSTEM SETUP
Set up the system components by making the following connections.
1. Set the voltage selector switch to 115V (U.S. and Canada) or 230V and plug the
power cord into the power socket (see Figure Section 2-1).
NOTE:
The correct AC input voltage must be
properly set. Select the appropriate voltage with
the voltage selector switch located at the rear of
the system.
Figure Section 2-1 Voltage Selector Switch
2.
Connect the keyboard, mouse, monitor, and printer cables to the back of the
system (see Figure Section 2-2).
Figure Section 2-2 Peripheral Connections
Printer Port
Serial Ports
VGA Monitor
Connector
Keyboard Port
Mouse Port
Audio
Connectors