NEC POWERMATE P - SERVICE MANUAL 1995, Инструкция по обслуживанию и справочник, Страница: 58 / 171

Setup and Operation 2-21
n
Disabled
−
keeps the computer in a full on state and eliminates the following
power management options.
IDE Drive Power Down
The IDE Drive Power Down field controls whether or not a spin down command
will be issued to the IDE drives when the system goes into low power mode. This
field can be either “Enabled” or “Disabled.” The default is “Enabled”.
VESA Video Power Down
The VESA Video Power Down field controls the VESA power management
command issued to the graphics card when the system goes into low power mode.
Setting are dependent upon the VESA mode(s) supported by your graphic card.
The following choices are available.

Disabled

Standby (default)

Suspend

Sleep
Inactivity Timer (Minutes)
The Inactivity Timer (Minutes) field controls the number of minutes that the
system will detect no user activity before going into low power mode. Minutes
range between 0 and 255; the default value is 30 minutes.
Hot Key
The hot key field is used to define a key which, when entered, will cause the BIOS
to put the OS into power management mode. Use this field to choose an
alphabetic character . Press CTRL + ALT + user defined alphabetic character
when not in Setup to use the feature. Typically, there is some delay before the
system enters power manage mode; the speaker issues two tones.
If there is a User Password in effect the Num Lock, Caps Lock, and Scroll Lock
lamps on the keyboard to flash in sequence, indicating that the system is in Secure
Mode. (See Set User Password field in “Security Menu.”)
In this case the password will have to be entered before you regains control of the
system. This password will not be echoed to the screen. The following table
describes how the Powerdown hot key interacts with the Security Hot Key.